Introduction of AVR developer kit
- User can have a test downloading user’s created program on AVR ISP (In System Programming) developing kit and AVR internal program memory.
(Supports Flash Read/Write).
- This kit can download all 8 bits AVR micro controller supporting ISP such as ATMEGA2560, ATMEGA2561, ATMega128, ATMega32, ATMega16 and ATMega8. (compatible with 3.3V/5V).
- This kit can be used for micro controller compatible with 8051 of 89S series such as AT89S52 and AT89S51.
- Supporting S/W (all kinds of lectures are available at http://www.NewTC.co.kr) is possible to download automatically after compiling in ICC-AVR.
- CodeVision C Compiler, Supports V1.24.6 Commercial Release and beyond (V1.24.7F is not supported).
- Stable working is available in V1.25.x version and higher.
- This kit supports all the newest version of AVR STUDIO (4.18 ~ 4.13).
Introduction of AD-JTAG
- Setting the break point for JTAG developing kit for AVR and each port, interrupt and register in AVR, you can see the working condition of chip according to source code line.
- This kit only supports AT90CAN128, ATmega128, ATmega16, ATmega162, ATmega169, ATmega32, ATmega323 and ATmega64 of AVR Micro Controllers.
- It is possible to download and debug a program on AVR from EwAVR in AVR Studio and IAR.
- S/W for use with
- How to upgrade JTAG and all kinds of lectures on AVR are serviced free in upgrading the version of AVR Studio at http://www.NewTC.co.kr.
- CodeVision C Compiler
- AVR Studio 4.18 (build 684)
http://www.atmel.com/dyn/resources/prod_documents/AvrStudio4Setup.exe
If difficult to upgrade, please visit our company or send the kit to us at out and home parcel charge collect for free upgrade.
• This kit can support V1.24.6 Commercial Release and beyond (V1.24.7F is not supported).
• Stable working is available at V1.25.x version and higher.
How to connect kit with AVR
Connect TCK, TDO, TMS and TDI in AVR with TCK, TDO, TMS and TDI in AVR JTAG.
AD-JTAG_V02_connection connector circuit
JTAG 연결 커넥터 회로도
